Application scenarios：

Specifically designed for pitted surfaces, hollowing, peeling, cracks, exposed reinforcement, and sanding.

Expanded Application Scope：

Cement pavement repair material is not only suitable for the rapid remediation of common pavement diseases but also widely applicable to the following specific scenarios and structures:

Urban Roads & Municipal Pavements

Quick repair of municipal roads, sidewalks, non-motorized lanes, and curbs to minimize traffic disruption and urban impact.

Highways & Expressways

Emergency repair of potholes, slab edges, transverse and longitudinal cracks, and spalling on high-speed roads, meeting the requirements for high strength and rapid opening to traffic.

Parking Lots & Logistics Yards

Repair of vehicle load-induced cracks, surface wear, and joint damage in parking areas, logistics parks, and freight yards, withstanding frequent heavy-duty vehicle traffic.

Bridge Decks & Ramps

Repair of concrete bridge deck peeling, waterproof layer damage, and expansion joint zones, offering high adhesion and compatibility with old concrete.

Airport Runways & Taxiways

Rapid repair of runway surface diseases during flight intervals, meeting high flatness and strength standards for aviation use.

Industrial Plant Floors

Repair of wear, chemical erosion, and impact damage on factory floors, workshops, and warehouse grounds, resistant to heavy loads and abrasion.

Tunnel Pavements

Repair of concrete pavement diseases inside tunnels, such as surface spalling and joint cracking, suitable for enclosed and humid environments.

Port Terminals & Container Yards

Repair of surface cracks and wear in heavy-load operation areas, resistant to compression and corrosion from seawater and vehicle fluids.

Commercial Plazas & Pedestrian Streets

Restoration of decorative concrete pavements, with color coordination and seamless repair, maintaining aesthetic integrity.

Rural Roads & County Roads

Economical and efficient repair of aging cement roads in rural areas, extending service life and improving travel safety.

Product Features：

Fast Setting & Quick Traffic Opening

Initial setting in 2 hours, trafficable in 3 hours – reducing costs and improving efficiency.

High Strength & Weather Resistance

Compressive strength over 100 MPa; ultra-thin 1mm repair layer withstands heavy loads; 5 times more resistant to aging.

Strong Adhesion & Seamless Finish

Bonding strength ≥1.6 MPa; color blends seamlessly with existing pavement; no cracking or detachment.

Convenient & Environmentally Friendly

Easy to use, eco-friendly formulation.

Typical Technical Specifications (under standard test conditions: 23℃±2℃, RH 50%±10%)

Form: Powder (mixed with water on-site)

Net Content: 25±0.5 kg per bag

Compressive Strength: >100 MPa

Bonding Strength: ≥1.6 MPa

Initial Setting Time: 2 hours

Traffic Opening Time: 3 hours

Suitable for thin-layer repair (from 1 mm)

Storage Conditions

Store in a cool, dry place protected from freezing. Shelf life: 6 months.

Instructions for Use：

Clean and pre-wet the repair area before application.

Mix with clean water as per recommended ratio and stir until uniform.

Apply within the temperature range of 5–35℃; avoid rain or snow during application and within 4 hours after.

Do not add other materials or solvents.

Compact and finish surface promptly after pouring.